6 after site survey – Panasonic HYBRID IP-PBX KX-TDA50 User Manual
Page 107
Advertising
2.7 Connection of 2.4 GHz Portable Stations
Installation Manual
107
2.7.6
After Site Survey
After obtaining the proper measurement results, exit Radio Signal Test mode before connecting the CS to
the Hybrid IP-PBX.
1.
Keep pressing the POWER button on the PS until the PS is turned OFF.
2.
Disconnect the AC adaptor or battery box from the CS and stop supplying electricity.
3.
Switch all DIP switches on the CS from ON to OFF.
1
2
3
4
5
6
OFF
ON
Advertising