Tuner listening to the radio 9, Tuner, Listening to the radio – Pioneer KEH-P6020RB User Manual

Page 9

Advertising
background image

03

Section

Tuner

En

9

English

Español

Deutsch

F

rançais

Italiano

Nederlands

Listening to the radio

These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 10.
This unit’s AF (alternative frequencies search)
function can be switched on and off. AF should
be off for normal tuning operation (refer to page
14).

1

BAND

indicator

Shows which band the radio is tuned to, MW,
LW or FM.

2

FREQUENCY

indicator

Shows to which frequency the tuner is
tuned.

3

PRESET NUMBER

indicator

Shows what preset has been selected.

4

STEREO

() indicator

Shows that the frequency selected is being
broadcast in stereo.

1 Press

SOURCE

to select the tuner

.

2 Use

VOLUME

to adjust the sound level.

Rotate to increase or decrease the volume.

3 Press

BAND/ESC

to select a band

.

Press

BAND/ESC

until the desired band is dis-

played,

F1

,

F2

,

F3

for FM or

MW/LW

.

4 To perform manual tuning, press

2 or 3

with quick presses.
The frequencies move up or down step by step.

5 To perform seek tuning, press and hold

2

or

3 for about one second and release.

The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold

2 or 3 you can skip

broadcasting stations. Seek tuning starts as
soon as you release the buttons.

Note

• When the frequency selected is being broad-

cast in stereo the

STEREO ()

indicator will

light.

3

1

4 2

Advertising
This manual is related to the following products: