Pioneer LASERDISC/COMPACT DISC PLAYERS CLD-V2400 - Manual (Page 105)

47) REGISTER C SET LD/CD
Function: Changes the current setting of Register C. (Miscellaneous)
Format: Integer R C
Explanation: When power is turned ON, the Side Repeat function of Register C is
set to ON. If Function Switch 1 on the rear panel of the player is
ON (DOWN), the Load Start and Power-On Start functions of
Register C are also set to ON. If Function Switch 2 is ON (DOWN),
the Baud Rate is set to 1200. Note that some functions, such as
Test Mode, may suspend playback or disable further control.
The functions listed below can be set. To set a function to ON,
give the value indicated by the integer. To set multiple functions
to ON, the integer values must be added up. All eight functions can
be specified in combination by using the decimal values from 0 to
255. The completion status is returned immediately.
NOTE: When “Repeat Side” or “Chapter Repeat” is selected by the
RCU, the Side Repeat function of Register C goes to “ON” and when
“Auto Return” is selected by the RCU, the Side Repeat Function of
Register C goes to “OFF”.
NOTE: Test Mode is used when the player is serviced, to evaluate player operations.
Execution: * Initial value 0
3 R C <C/R>
R <C/R>
* Side-Repeat, Load-Start to ON, background color BLUE
1 6 R C <C/R>
R <C/R>
* Background Color BLACK; Side-Repeat and Load-Start to OFF
Integer Function 1 0
1 Side-Repeat ON OFF
2 Load-Start ON OFF
4 Power-on-Start ON OFF
8 (Not Used) — —
16 Background Color BLACK BLUE
32 TxD Terminator <CR+LF> <CR>
64 BAUD Rate 1200 4800
128 Test Mode ON OFF
Figure 4-V
CLD-V2600 / 2400 Level I & III User’s Manual TP 117 v. 2.0 • 12/93 4-43
CLD-V2600 / 2400 Level I & III • Chapter Four