Pioneer LASERDISC/COMPACT DISC PLAYERS CLD-V2400 - Manual (Page 117)

Interface Cable Specifications
Connecting the CLD-V2600/2400 to Macintosh and Apple II Computers
The CLD-V2400 uses the following cables to attach to the computers listed below:
Computer Pioneer Cable # Connection
Macintosh Plus, SE, II
& Apple IIGS CC - 04 DB-15 male to Mini-Din 8 male
Apple II, II+, IIE with
Super Serial Card CC - 03
DB-15 male to DB-25 male
C-2
TP 117 v. 2.0 • 12/93
Appendix C CLD-V2600/2400 Interface Cable Specifications
Pin Configurations for Specific Cables
CC-04 DB-15 male to Mini-Din 8 male
LD Player Computer
GND 1 4 Frame Ground
8 RxD +
TxD 2 5 RxD -
RxD 3 3 TxD -
DTR 4 1 HS OUT
Conn. Housing
Shield
Conn. Housing
The CC-04 is an RS-232C cable which interfaces Pioneer’s
CLD-V2600, CLD-V2400, LD-V4400, LD-V8000, LD-V4200
(discontinued), LD-V2200 videodisc players and the LC-V330
AutoChanger to the Macintosh Plus, SE, Macintosh IIs, and
Apple II GS computers. It connects the 15-pin RS-232C port on
the player to the Circular-8 Modem port on the Apple/Macintosh.
CC-03 DB-15 male to DB-25 male
LD Player Computer
GND 1 7 GND
TxD 2 3 RxD
RxD 3 2 TxD
DTR 4 5 CTS
6 DSR
Conn. Housing
Shield
Conn. Housing
The CC-03 is an RS-232C cable which interfaces Pioneer’s
CLD-V2600, CLD-V2400, LD-V4400, LD-V8000, LD-V4200
(discontinued), LD-V2200 videodisc players and the LC-V330
AutoChanger to the IBM InfoWindow*, the Apple II series Super
Serial Card and to Pioneer’s UC-V102 Videodisc Controller. Note:
With a 25 pin female-to-female adapter, the CC-03 can be used to
connect the players to an IBM PC or compatible that supports a 25
pin RS-232C port.
*IBM InfoWindow does not support the LC-V330 AutoChanger.