Panasonic DLP PT-D3500U - Manual (Page 20)

20
Example of connecting with PCs
Note • For the specifications of the RGB signals that can be applied from the PC, see the data sheet on
page 60.
• If your PC has the resume feature (last memory), the computer may not function properly until the
resume capability is disabled.
• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD
terminals. Doing so may disrupt the images since, rather than using synchronization initiated by
the GREEN signal, the sync signals of the SYNC/HD and VD terminals will be used instead. Even
if the images are not disrupted, the white balance may be lost. If this is the case, select “USER” as
the “COLOR TEMP.” setting (see page 29), and adjust “W-BAL LOW”.
• The white balance may be lost when the SYNC ON RGB signal is input. If this is the case, select
“USER” as the “COLOR TEMP.” setting (see page 29), and adjust “W-BAL LOW”.
Connection
DVI-D Cable
(available in the
market)
PC with
DVI-D port
PC
PC
Control PC
Audio Amplifier
Speakers