Precor p20 - Manual (Page 71)

Assembling the EFX
21
Connect … To …
The console power cable (red
and black, individual leads)
The power connector on the
jack panel
The television cable (black
and round)
The coaxial connector on the
jack panel
The Ethernet cable (black and
flat)
The eight-connector modular
jack on the jack panel
10. Repeat steps 7 through 9 for the remaining cables you
want to install.
11. Replace the central plastic base cover, then attach the
four buttonhead screws you removed along with the
cover. Tighten the screws completely.
12. Replace the lift cover that was removed in the first step.
Figure 7: Lift cover replacement