PSC Scanners - Manual (Page 15)

06656 9
Data Synchronization
• Disable Data Synchronization
• Enable Data Synchronization
• Active Polarity High
• Active Polarity Low
Serial Communication and Wedge Options
The following communication options are used to define how your
PSC scanner communicates with the host system through its serial
interface or its keyboard wedge interface.
A message transmitted from the scanner upon a successful decode
has the following format:
Some of these attributes, e.g., prefix, preamble, etc., may not be
required or may vary from one host system to another. The parameter
selection process allows you to tailor these elements for the particular
requirements of your host system. You may also program an inter-
character delay to prevent data overrun problems with your host ter-
minal.
Options specific to serial communications are:
Baud Rate Protocol
Parity Inverted Serial
Stop Bits External Trigger
Word Length Buffering Level
Each of these options is discussed in greater detail in the section on
Serial Communication Parameters.
Prefix
Terminal
ID
Preamble Code ID Data Postamble Suffix