NEC P/N 1093099 - Manual (Page 30)

Call Forwarding
22 ◆ Features DSX Feature Handbook
Call Forwarding Toggle in a Personal Speed Dial Bin
If an extension doesn’t have an available Feature Key for a Call Forwarding key, the user can program a Per-
sonal Speed Dial bin for similar operation (without the BLF). To do this:
❥ While on hook, dial #77 .
❥ Press the key for the Personal Speed Dial bin you want to program + HOLD .
❥ For LINE/GRP/ICM , press INTERCOM + HOLD .
❥ For NUM , dial *3 + HOLD .
❥ For NA , enter a name of your choosing + HOLD .
❥ Press SPEAKER to exit.
While the extension is idle, pressing the bin key puts the extension in the Call Forwarding programming
mode - the same as pressing
INTERCOM and dialing *3 .
❥ If the extension has Call Forwarding enabled, and the user presses the bin key and waits (for at least 6
seconds), Call Forwarding is automatically cancelled.
❥ If the extension has Call Forwarding disabled, and the user presses the bin key and waits (for at least 6
seconds), the prior Call Forwarding mode is automatically enabled (if any).
Call Forwarding Confirmation Tone
Keyset users will hear a single confirmation beep after enabling or cancelling Call Forwarding. Single line
telephone users will hear Intercom dial tone after enabling or cancelling Call Forwarding.