NEC P/N 1093099 - Manual (Page 48)

Dial Number Preview
40 ◆ Features DSX Feature Handbook
Dial Number Preview
Description
Dial Number Preview lets a display keyset user dial and review a number before the system dials it out.
Operation
Dial Number Preview helps the user avoid dialing errors.
Using Dial Number Preview
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To dial using Dial Number Preview:
1. Do not lift the handset and do not press SPEAKER or INTERCOM .
2. Dial * .
• Your display shows: DIAL PREVIEW .
3. Dial the number you want to call.
• Your display shows the digits for your call.
4. Press a line key.
• Your call will dial out on the line selected.
Editing the Displayed Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To correct the displayed digits before dialing them out:
1. Press Volume Up or Volume Down until the cursor replaces the digit you want to change.
• Volume Up moves the cursor left; Volume Down moves the cursor right.
2. Dial the digit that you want to replace the cursor.
3. Do one of the following.
a. Press Volume Up or Volume Down to place the cursor over any other digits you want to edit.
b. Press Volume Down until the entire number displays to the left of the cursor.
• The system will only dial the digits to the left of the cursor.
4. Press a line key to have the system automatically dial the displayed number.