Nokia WAP and SMS gateway - Manual (Page 62)

Chapter 5. Setting up a SMS Gateway
Variable Value Description
reply-couldnotrepresent string
If set, replaces the SMS message
sent back when kannel could not
represent the result as a SMS
message. Defaults to
Result
could not be represented
as an SMS message. .
reply-requestfailed string
If set, replaces the SMS message
sent back when kannel could not
contact http service. Defaults to
Request Failed .
reply-emptymessage string
If set, replaces the SMS message
sent back when message is
empty. Set to "" to enable empty
messages. Defaults to
<Empty
reply from service
provider > .
mo-recode boolean
If true, kannel will try to convert
UCS2 messages received to
ISO-8859-1. If it’s possible, the
message will have
coding equal
to 7 bits and charset equal to
iso-8859-1 .
http-request-retry integer
If set, specifies how many retries
should be performed for failing
HTTP requests of sms-services.
Defaults to 0, which means no
retries should be performed and
hence no HTTP request queueing
is done.
http-queue-delay integer
If set, specifies how many
seconds should pass within the
HTTP queueing thread for
retrying a failed HTTP request.
Defaults to 10 sec. and is only
obeyed if
http-request-retry is set to
a non-zero value.
A typical ’smsbox’ group could be something like this:
group = smsbox
bearerbox-host = localhost
sendsms-port = 13131
sendsms-chars = "0123456789 "
global-sender = 123456
access-log = "kannel.access"
log-file = "smsbox.log"
55