NEC Express 5800/320Lb - Manual (Page 100)

4-16
Option Parameter Description Your Setting
POST Pause
Monitoring
Time-out 1 - [3] - 20 Specify the POST monitoring time period during
boot-up restriction.
[ ]: Factory-set
IMPORTANT:
If you set a small value for "Boot Monitoring Time-out Period", you can shorten the waiting
time to the rebooting. It is recommended to set a value of more than 3 minutes though smaller
value setting is available when external devices are not used. As it depends on the user’s setting
environment, make sure to execute enough evaluation after the configuration of the
environment.
Option ROM
Select "Option ROM" on the Advanced menu to display the following screen and enable/disable
expansion of Option Rom BIOS on the PCI bus.
On Board SCSI:
On Board LAN 1:
On Board LAN 2:
PCI Slot 1:
PCI Slot 2:
PCI Slot 3:
Disables/enables the
mapping of the on-board
SCSI BIOS.
Item Specific Help Option ROM
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F1 Help -/+ Change Values F9 Setup Defaults
F10 Save Changes & Exit Sub-Menu Enter Select Esc Exit
Phoenix BIOS Setup Utility
Advanced
Select Item
Select Menu