Start procedure, Important – NEC Express 5800/320Lb User Manual
Page 114
4-30
Start Procedure
Start Fast!UTIL in the procedure below:
19.
Turn on the power of the server.
The start message appears on a screen in the middle of POST.
20.
Press Q and Ctrl together.
Fast!UTIL is started.
IMPORTANT:
Press these keys before message "QLogic Adapter using IRQ
number x" or later appears.
QLogic Corporation
QLA 1216x PCI SCSI ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1993-2001 All rights reserved.
www.qlogic.com
Press <CTRL-Q> for Fast!UTIL
ISP12160 Firmware Version xx.xx.xx
QLogic Adapter using IRQ number X
Device
Device
Adapter
SCSI SCSI
Vendor
Product Product
Number
Type
Number
ID
LUN
ID
ID
Revision
81
Disk
0
0
0
SEAGATE ST32550
7394
21.
Highlight "Select Host Adapter" using the cursor keys and press Enter.
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!UTIL
Fast!UTIL Options