Nokia 702 - Manual (Page 114)

Tools
114
Network
The device can automatically switch between the GSM
and WCDMA networks. The GSM network is indicated
with
in the standby mode. The WCDMA network is
indicated with .
Network mode (shown only if supported by the
operator)—Select which network to use. If you select Dual
mode , the device uses the GSM or WCDMA network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection —Select Automatic to set the phone
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in the device.
Glossary: A roaming agreement is an agreement
between two or more network service providers
to enable the users of one service provider to use
the services of other service providers.
Cell info display —Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement settings
Indicators shown in the standby mode:
A headset is connected.
A loopset is connected.
A car kit with Bluetooth technology is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset , Loopset , or Bluetooth Headset , and the
following options are available:
Default profile —To set the profile that you want activated
each time you connect a certain enhancement to the
device. See "Set tones" on page 23.
Automatic answer —To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to
Beep once or Silent , automatic answer is
disabled.