Nokia 702 - Manual (Page 97)

Connectivity
97
When the connection has been established, the note
Sending data is shown.
The Sent folder in Messaging does not store messages sent
using a Bluetooth connection.
Icons for different devices:
Computer
Phone
Audio or video
Headset
Other
Checking the status of the Bluetooth connection
• When is shown in the standby mode, a Bluetooth
connection is active.
• When is blinking, the device is trying to connect
to the other device.
• When is shown continuously, the Bluetooth
connection is active.
Pair devices
Tip: To define a short name (nickname or
alias), scroll to the device and select
Options
> Assign short name in the paired devices
view. This name helps you to recognise a
certain device during device search or when a
device requests a connection.
Paired devices are easier to recognise; they are indicated
by
in the device search. In the Bluetooth main view,
press to open the paired devices view ( ).
To pair with a device, select Options > New paired device .
The device starts a device search. Select the device.
Exchange passcodes. See step 4 in "Send data using a
Bluetooth connection" on page 96.
To cancel a pairing, scroll to the device, and select Options
> Delete . If you want to cancel all pairings, select Options
> Delete all .
Tip: If you are currently connected to a device
and delete the pairing with that device, pairing
is removed immediately, but the connection
remains active.
To set a device to be authorised or unauthorised, scroll to
a device, and select from the following options:
Set as authorised —Connections between the device and
this device can be made without your knowledge. No
separate acceptance or authorisation is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust.
means devices that the auto-connection is set.
Set as unauthorised —Connection requests from this
device must be accepted separately every time.