Eject the memory card, Charge the battery, Headset – Nokia 702 User Manual

Page 13: Eject the memory card charge the battery headset, Befor e use

Advertising
background image

Befor

e use

13

Eject the memory card

1

Open the door of the memory card
slot.

2

Press the memory card to release
it from the slot (

14

).

3

Remove the memory card. If the
device is switched on, press

OK

.

Do not open the memory card slot
door in the middle of an operation. This may damage the
memory card and the device, and data on the card may be
corrupted.

Charge the battery

1

Connect the charger
to a wall outlet.

2

Connect the power
cord to the device
(

15

).

The battery indicator
bar starts scrolling.
The device can be used while charging. If the battery is
completely discharged, it may take a few minutes
before the charging indicator is shown.

3

When the battery is fully charged, the bar stops
scrolling. Disconnect the charger, first from the device,
then from the wall outlet.

Headset

Connect the headset
compatible with the
device to the Pop-
Port™ connector.

Warning: This headset may affect your ability
to hear sounds around you. Do not use this
headset in situations that may endanger your
safety.

Advertising