Newcon Optik DN140M - Manual (Page 2)

DISCLAIMER
The use of this device might be restricted or forbidden in your
area. Check with local authority. Newcon Optik will not accept
any responsibility for improper use of this scope.
CONTENTS
1- Important Information
2- Overview
i) Application and Advantages of DN-140M
ii) Warning
iii) Precautions
3- Components
4- Specifications
5- Construction
6- Operating Instructions
6.1 Pre-starting procedures
6.2 Testing of operation
6.3 Operation at night
7- a) Using the DN-140M with Camera or Video
b) Using the DN-140M as a rifle scope
8- Troubleshooting
9- Warranty
10- Customer support
11- Acceptance Certificate
2
NEWCON OPTIK DISCLAIMS ANY WARRANTIES, EXPRESSED
OR IMPLIED, WHETHER OF ABILITY TO SELL OR FITNESS
FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET
FORTH HEREIN. THE SOLE OBLIGATION OF NEWCON
UNDER THIS LIMITED WARRANTY SHALL BE TO PEPAIR OR
REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH
THE TERMS SET FORTH HEREIN. NEWCON EXPRESSLY
DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES WHICH MAY
RESULT FROM BREACH OF ANY WARRANTY, OR ARISING
OUT OF THE USE OR INABILITY TO USE ANY NEWCON
PRODUCT.
10. Customer Support
Should you experience any difficulties with your Newcon Optik
product, consult the enclosed manual. If the problem remains
unresolved, contact our customer support department at
(416) 663-6963. Our operation hours are 9am-5pm, Monday-
Friday, Eastern Standard Time.
At no time should equipment be sent back to Newcon without
following the instructions of our technical support department.
Newcon accepts no responsibility for unauthorized returns.
To locate NEWCON Authorized Dealer near you call:
Tel: (416) 663-6963 Fax: (416) 663-9065
TOLL FREE – 1-877-368-6666
Email: [email protected]
Internet: HTTP://WWW.NEWCON-OPTIK.COM
The defective products should be shipped to:
In USA: 3310 Prospect Ave. Cleveland, OH 44115
In Canada and Overseas: 1183 Finch Ave. W., Suite 302,
Toronto, ON. M3J 2G2
15