Newcon Optik DN140M - Manual (Page 7)

6. OPERATION INSTRUCTIONS
WARNING!
NEVER DIRECT THE LENS IN THE DIRECTION OF
BRIGHT LIGHT!
6.1 Starting procedures.
1. Unpack the device. In order to install the batteries,
open battery house cover (4), and install the batteries.
Check the functioning of the device by switching it on
(click switch 10) and looking through eyepiece (2). If power
supply and the batteries are functional, you will see a greenish-lit
screen. If the screen is not lit, check the batteries. Replace the
batteries if necessary. Once everything works, take the time to
fill in your warranty card.
Note: The scope will remain On for up to several minutes
after the unit is shut Off. This is normal.
6.2 Testing operation,
Direct the device on an object placed within 10-20 m
from the viewer. Turning the focus ring (7), eyepiece (2) try to
achieve the sharpest image on the screen of the image tube.
10
3. COMPONENTS
DN-140M is supplied with the following components:
NAME QUANTITY
DN-140M unit 1
Case 1
Lens cap
1
I/R illuminator 1
Weaver weapon mount (or European) 1
Rubber eye guard 1
Warranty Card 1
User’s Manual 1
OPTIONAL ACCESSORIES
Camera adapter ring 1
Video adapter ring 1
7