Netopia 3300 User Manual
Page 119
Multiple Network Address Translation 4-23
•
Select the map list you want to bind to this Connection Profile and press Return. The map list you selected
will now be bound to this Connection Profile.
•
Select NAT Server List and press Return. A pop-up menu displays a list of your defined ser ver lists.
•
Select the ser ver list you want to bind to this Connection Profile and press Return. The ser ver list you
selected will now be bound to this Connection Profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields’ visibility are dependent only on the IP Addressing type.
IP Profile Parameters
+--NAT Map List Name---+
Address Trans+----------------------+s
IP Addressing| Easy-PAT List |mbered
NAT Map List.| my_map |sy-PAT List
NAT Server Li| <<None>> |sy-Servers
NAT Options..| |
Stateful Insp| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
Filter Set...| |
Remove Filter| |
| |
| |
| |
| |
RIP Profile O+----------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.
IP Profile Parameters
+-NAT Server List Name-+
Address Trans+----------------------+s
IP Addressing| Easy-Servers |mbered
NAT Map List.| my_servers |sy-PAT List
NAT Server Li| <<None>> |sy-Servers
NAT Options..| |
Stateful Insp| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
Filter Set...| |
Remove Filter| |
| |
| |
| |
| |
RIP Profile O+----------------------+
Up/Down Arrows to select, then Return/Enter; ESC to cancel.