Netopia 3300 - Manual (Page 41)

WAN Configuration 2-25
• Inside IP Address/Netmask – For outbound flows, specify an IP address and subnet mask on your LAN. For
inbound flows, this setting is ignored.
• Outside IP Address/Netmask – If you want traffic destined for and originating from a cer tain WAN IP
address to be controlled, enter the IP address and subnet mask here. If you leave the default all-zeroes,
the outside address check is ignored.
For outbound flows, the outside address is the destination IP address for traffic; for inbound packets, the
outside address is the source IP address.
When you are finished, select COMMIT and press Return. You will be returned to the Diffser v Options screen
and your settings will take effect.
Priority Queuing (TOS bit)
Netopia Firmware Version 8.7 offers the ability to prioritize delay-sensitive data over the WAN link on DSL
connections.
Cer tain types of IP packets, such as voice or multimedia packets, are sensitive to latency introduced by the
network. This means that if such packets are not received rapidly, the quality of ser vice degrades. If you expect
to route significant amounts of such traffic you can configure your router to prioritize this type of traffic using the
priority queuing feature.
To configure your router to prioritize delay-sensitive data, navigate to the Advanced Connection Options screen
in the console menu.
The Advanced Connection Options screen appears.
Main
Menu
WAN
Configuration
Advanced Connection
Options