Additional user programmable features – NEC 10930 95 User Manual
Page 15
Additional User Programmable Features
User Programmable Features Chart
Feature
Mnemonic
Numeric
Operation
Call Forwarding Clear All
#CC
#22
#CC + Y to clear (cancel) forwarding or N to exit without clearing +
SPEAKER to exit.
Hotline Key Assignment
#HL
#45
#HL + Press flashing Hotline key + Enter extension for new Hotline
partner + HOLD + Program another Hotline key or SPEAKER to exit.
Off-Hook Signaling
#OHS
#647
#OHS + Select mode (1 = Outside line, 2 = Calls from Hotline partner,
3 = Intercom) + Select option (see below) + SPEAKER to exit.
Outside line:
1 = Camp On tone, 2 = Off Hook Ringing, CLEAR = None.
Hotline partner:
1 = Camp On, 2 = Voice Over, CLEAR = None.
Intercom:
1 = Camp On, 2 = Voice Over, CLEAR = None.
Paging (Incoming)
#VP
#87
#VP + Y to enable or N to disable + SPEAKER to exit.
Prime Line Assignment
#PLA
#752
#PLA + Press one of your flashing programmable keys, INTERCOM,
or CLEAR for none + SPEAKER to exit.
Feature Key Assignment
#KP
#57
#KP + Press key you want to program + HOLD + INTERCOM + Press
VOLUME to select key option + HOLD + (Enter any additional data +
HOLD – see the Telephone Feature Handbook) + SPEAKER twice to exit.
Ringing Line Preference
#RLP
#757
#RLP + Y to enable or N to disable +
SPEAKER to exit.
Speed Dial
#SP
#77
#SP + Dial bin number or press bin key + HOLD + Dial outside line (e.g.,
1), Line group (e.g., 90-98), or INTERCOM for Intercom feature + HOLD
+ Number to store + HOLD twice + Name + HOLD + SPEAKER to exit.
(System bins are 201-299. Personal bins are 701-720.)
Time and Date
#TD
#83
#TD + Enter time in 24-hour clock using hours (2 digits), minutes (2
digits) and seconds (2 digits) + HOLD + Enter date using month (2
digits), day (2 digits) and year (4 digits) + HOLD +
SPEAKER to exit.
Intercom Voice Announce
(for Incoming Intercom Calls)
#VA
#82
#VA + V for voice announce or R for ring + SPEAKER to exit.
To program a feature, dial # and the feature’s code. For example, to enable incoming Paging, dial # + V P Y, then SPEAKER
to hang up. Normally, Call Forwarding Clear All, System Speed Dial, and Time and Date are
only available to extension 300
.
For more on the features, see the
Telephone Feature Handbook
.
15
Features to make you
More Productive
1093095_rev1-26.qxd 5/31/06 8:33 AM Page 15