NEC DTERM DTL-RPT-1 - Manual (Page 23)

Repeater Guide 3 - 1
___________________________________________________________________________________
Chapter 3
Troubleshooting and Maintenance
S
ECTION
1 T
ROUBLESHOOTING
C
HART
The following chart provides common problems and possible solutions.
Problem Try
There is a lot of static when calls hand-off
to the repeater.
and/or
The LED on the repeater won't stop
flashing.
Moving the repeater closer to the base.
Checking for interference from electronic
devices.
Making sure the repeater is not too close to
metal objects or thick walls.
Calls won't hand-off to the repeater. Making sure the repeater is inside the base's
good signal range.
Making sure there is at least 35 feet between
repeaters.
Resetting the repeater and registering it to the
base again (refer to
Chapter 2 , 4.3 Registering
to a Different Base on page 2-5 .)
I used to be able to connect to the base, but
now I can't. Making sure the repeater is powered on.
Resetting the repeater and registering it to the
base again (refer to
Chapter 2 , 4.3 Registering
to a Different Base on page 2-5 .)
When I'm on a call, the handset starts
beeping. Turning off the verification tone (refer to
Section 2 Turning on the Verification Tone on
page 3-2
).