NEC MultiSync V462 - Manual (Page 29)

English-27
English
OVER SCAN
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
S-VIDEO inputs only
Some video formats may require different scanning modes in order to best display the image. ON
ON Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
OFF Image size stays within the display area. The whole image is displayed on the screen.
NOTE: When you use a computer with HDMI out, please set “OFF”.
OPTION SETTING You can set this setting when option board accessory is connected to the monitor.
Please contact your supplier for detailed information about Option board slot accessories. -
OPTION POWER Allow the monitor to supply power to Option board slot during power save mode or standby
mode. OFF
INTERNAL PC The function is available for OPS based PC.
OFF WARNING When OPTION POWER is “OFF”, warning message is shown when monitor power off or power
save mode.
AUTO OFF Select if monitor power is OFF when connected PC is OFF
START UP PC When ON is selected, connected PC start-up.
FORCE QUIT When ON is selected, it performs force quit PC.
120Hz
(not adjustable)
-
MURA COMP
(not adjustable)
-
RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
DEINTERLACE, COLOR SYSTEM, OVER SCAN. -
FACTORY RESET Resets OSD options back to factory settings EXCEPT FOR:
SCHEDULE SETTINGS, DATE & TIME, LANGUAGE, OSD ROTATION, CHANGE SECURITY
PASSWORD and SECURITY. -