Setting up your router for internet access, Setting up your router for internet – NETGEAR DGN2000 User Manual
Page 21
Installing Your Router Manually (Advanced, Mac, and Linux Users)
17
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your wireless-N modem
router to set it up initially and to make any changes to your wireless router’s settings later.
To access the router:
1.
Type http://192.168.0.1 in the address field of your browser, and then click Enter.
.
A login window similar to the one shown in
will display.
The factory default state is reset when you press the Wireless On/Off and WPS
buttons on the side panel of router simultaneously. See
Configuration and Password” on page 36
for more information.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
Figure 11
Figure 12