NETGEAR DGN2000 - Manual (Page 28)

24 Configuring Your Wireless Network
the WPS-capable client. (For more information on setting up a mixed network, see the on-line
Reference Manual. A link to the Reference Manual is on the Resource CD.).
These instructions assume that you are configuring WPS on the router for the first time and
connecting a WPS-capable device.
To set up basic wireless connectivity:
1. Log in to the wireless-N modem router at its default LAN address of http://Default IP
Address Variable with its default user name of admin and default password of password, or
using whatever LAN address and password you have set up.
2. On the router main menu, select Add a WPS Client (computers that will connect wirelessly to
the router are clients). The Add WPS Client wizard screen displays. Click Next.
3. Select the method for adding the WPS client. A WPS client can be added using the Push
Button method or the PIN method.
• Using the Push Button. This is the preferred method.
If you choose to use WPS, the only security methods supported are WPA-PSK and
WPA2-PSK. WEP security is not supported by WPS.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
Figure 14