NETGEAR ADSL Firewall Router DG834 - Manual (Page 97)

Reference Manual for the ADSL Firewall Router DG834
Virtual Private Networking (Advanced Feature) 7-7
202-10005-05, June 2005
Figure 7-3: Client-to-Gateway VPN Tunnel
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
DG834
Note: This section uses the VPN Wizard to set up the VPN tunnel using the VPNC
default parameters listed in Table 7-2 on page 7-5 . If you have special requirements not
covered by these VPNC-recommended parameters, refer to “How to Set Up VPN
Tunnels in Special Circumstances” on page 7-35 to set up the VPN tunnel.
192.168.3.1
VPN Tunnel
DG834
22.23.24.25
PC
(Running NETGEAR
ProSafe VPN Client)
PCs
0.0.0.0