Net Optics Smart Filtering none - Manual (Page 19)

15
*** Confidential - DO NOT Distribute ***
Director
Launch terminal emulation software and set communication parameters to: 2.
115200 baud
8 data bits
No parity
1 stop bit
No flow control
The Net Optics CLI banner and login prompt are displayed in the Terminal Emulation software.
**********************************************************
* Net Optics Command Line Interface (CLI) *
* *
* Copyright (c) 2008 by Net Optics, Inc. *
* *
* Restricted Rights Legend *
* *
* Use, duplication, or disclosure by the Government is *
* subject to restrictions as set forth in subparagraph *
* (c) of the Commercial Computer Software - Restricted *
* Rights clause at FAR sec. 52.227-19 and subparagraph *
* (c)(1)(ii) of the Rights in Technical Data and Computer*
* Software clause at DFARS sec. 252.227-7013. *
* *
* Net Optics, Inc. *
* 5303 Betsy Ross Drive *
* Santa Clara, California 95054 USA *
* +1-408-737-7777 *
* *
**********************************************************
Login user:
CLI sign-on banner Figure 11:
Connect the remote CLI Interface
If you choose to run the CLI remotely, connect a network cable from a switch to the Management port on the back of
the Director chassis. Use any computer with an SSH client to access the CLI over the network.
Tip! ___________________________________________________________________________________________________
PuTTY is a freeware SSH client for Windows that can be downloaded from many sites on the Internet.
________________________________________________________________________________________________________
To connect the CLI for remote use over the Management port:
Connect the Director Management port to a network switch using a network cable. 1.
Open Direct (the default IP address is 10.60.4.180 and the SSH port is 22) from an SSH client on the network. 2.
Director displays the shell login prompt.
login as:
Shell login prompt Figure 12:
Enter 3. customer to log into the shell. The shell asks for the password.
login as: shellusername
[email protected]'s password:
Shell login Figure 13: