Net Optics Smart Filtering none - Manual (Page 50)

46
*** Confidential - DO NOT Distribute ***
Director
Command Sub-Command Parameters Example and description
sysip commit sysip commit
Activates pending changes defined with sysip set
set ipaddr=<address>
netmask=<netmask>
gw=<gateway> sysip ipaddr=192.168.1.2 netmask=255.255.0.0>
Parameters:
<address> is the IP address (default: 192.168.1.2)
<netmask> is the netmask (default: 255.0.0.0)
<gateway> is the gateway IP address (default:
192.168.1.1)
Sets the Director IP address, netmask, and gateway
IP address; requires a sysip commit command to
activate the new settings
show sysip show
Displays the current Director IP address information
time <time> time 13:02:00
Parameters:
<time> is hh:mm:ss
Sets the system time-of-day; if <time> is omitted, the
current time is displayed
upgrade srvip=<svrip>
user=<username>
pw=<passwd>
filename=<filename> upgrade srvip=168.192.20.2 user=bob pw=bobpw
filename=image021108 2
Parameter:
<svrip> is the IP address of the server that the
new image file is on
<username> is the user name needed for FTP
access to the server
<passwd> is the password needed for FTP
access to the server
<filename> is the name of the image file
Replaces the current system boot image with the
image in the specified file (see image command); all
parameters must be included and they must be in the
order shown