Nortel Networks M3310 - Manual (Page 117)

Digital Telephone IP Adapter Installation and Administration Guide 117
January 2005 Changing configuration settings using Configuration Manager
3 Click on the Send button to update the Digital Telephone IP Adapter unit
with the new information.
Note: When you change System Configuration parameters and Save to
Flash, calls can be dropped. Ensure that there are no active calls when you
make changes to these parameters.
IF you are THEN
logged on to the
Digital Telephone IP
Adapter unit, the changes are written into the Digital
Telephone IP Adapter unit’s buffer.
To save the changes in Flash memory, choose
Upload/Download
→
Save to Flash from the
Menu Bar.
not logged on to the
Digital Telephone IP
Adapter unit, the Confirmation Manager dialog box displays,
similar to the following:
Do one of the following:
a. Log on to the Digital Telephone IP Adapter
unit and then click on the Send button.
b. Save the changes to a file on your
administration PC using the File
→
Save
As command.