Nortel Networks M3310 - Manual (Page 148)

148 Digital Telephone IP Adapter Installation and Administration Guide
Using the digital telephone Standard 2.1
Offline Mode
This means you cannot place calls through the host
PBX.
Notes:
!
If you need to place a call through the host PBX
while in offline mode, enter the online SPRE
code. Refer to “SPRE Codes: Online” on page
119 for further details.
!
The Offline Modeïmessage is not persistent
on the M3903 telephone display. This message
sometimes only displays for part of the Offline
period.
Online Mode
This means you can place and receive calls through
the host PBX.
Port Already in
Use
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on
the RLC.
This message appears if the port that you are
attempting to log on to is already being used by
someone else.
Port Not Logged
In
If this message appears on your station, your station
participates in a multi-user or dynamic pool port on
the RLC. Your station is logged off.
Release and Try
Again
There are not enough DSP resources to process the
call. Try again at a later time.
Note: Ensure to initiate calls from the appropriate
calling key according to the following parameters:
!
Use the host calling key to call someone at the
host PBX site.
Bandwidth Limit
There is not enough bandwidth to complete the
requested action. Try again at a later time.
Message Description