Nortel Networks M3310 - Manual (Page 126)

126 Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 2.1
IP Gateway Enter the IP address of the IP gateway serving the
Digital Telephone IP Adapter unit. A gateway is a
device that functions as a node on two networks,
forwarding packets from one network to addresses
on the other networks. In Remote Gateway 9100
Series context, the gateway is the device on the
network that directs traffic to and from the Digital
Telephone IP Adapter unit.
DiffServ CodePoint This setting modifies the IP Header and is
applicable across the entire WAN. If enabled, this
feature allows you to set the DiffServ CodePoint
value. Refer to the "DiffServ CodePoint: Value" for
a list of values.
!
Click on the Enable option button if you want to
allow prioritization of voice packets sent from
this Digital Telephone IP Adapter unit over
WAN portions of the network.
!
Click on the Disable option button if you do not
want to allow prioritization of voice packets sent
from this Digital Telephone IP Adapter unit over
WAN portions of the network.
The default is Disable.
Field Description