Nikon Coolpix 300 - Manual (Page 10)

viii
Changing the language of the touch-panel display
When you first turn the camera on, the touch-panel display’s menus and
messages may appear in a language other than English. To change the
language of the display, follow the steps described in the second and third
chapters of this manual (“Before You Begin” and “First Steps”) to ready
the camera and stylus and to turn the camera on. Using the stylus, touch
OK in the lower right corner of the first menu that appears in the main
window of the touch-panel display. Then touch the MENU key with the
stylus. In the menu that appears, select the fourth item from the top.
The following window will appear.
Note: In this illustration, “xxxxx…”
is used in place of the characters that
will actually be seen in the display.
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxx
xxxxxx
Touch here
Note: In this illustration, “xxxxx…”
is used in place of the characters that
will actually be seen in the display.
xxxx xxxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
xxxxxxxxxxx
1/2