Nikon Coolpix 300 - Manual (Page 92)

78 Connections : Making a Serial Port Connection
Changing the Camera’s Port Settings
Before connecting the COOLPIX 300 to your computer, you will need to
adjust the camera’s data rate to match that of the computer’s serial port (for
information on your computer’s serial port settings, refer to the
documentation provided with your computer). Select
INTERFACE from
the second page of the COOLPIX 300’s setup menu to bring up the first
page of the interface menu, then press the Next (▼) or Page Down (
)
arrows. The menu shown at right will be displayed.
The numbers next to DATA RATE in the menu above correspond to the
data transfer speeds available with your COOLPIX 300. Using the stylus,
select a speed supported by your computer’s serial port.
▼ or
MENU SETUP I/F
« SERIAL »
DATA RATE 19200bps
9600bps
2/2 MENU SETUP I/F
« SCSI »
ID [6]
0 1 2 3
4 5 6 7
TERMINATOR ON OFF
1/2
▲ or