Nikon Coolpix 300 - Manual (Page 97)

83 Connections : Making a SCSI Connection
Attaching the Camera to Your Computer’s SCSI Chain
Before attaching your camera to the computer’s SCSI chain, make sure that
all devices in the chain, including the camera and the computer, are turned
off. Open the cover that protects your camera’s SCSI and serial connectors
(the cover is labeled “DIGITAL”) and connect the optional SCSI cable as
shown below. Be sure to use only the SS-E300 cable, available separately
from Nikon as part of the SCSI Kit.
Attach the other end of the cable to the last device in the computer’s SCSI
chain or, if no other external SCSI devices are present, directly to the
computer itself. Note that no more than eight devices, including the
computer and any internal SCSI devices, can be connected in a SCSI chain.
Caution: To avoid damage caused by static electricity, be careful not
to touch the pins of the SCSI connectors.