NEC AT-35 - Manual (Page 14)

FEATURES
Memory Redial
The last 30 telephone numbers dialled (up to 21 digits each) are stored in
the Outgoing Call Memory. To dial from the Outgoing Call Memory:
1. Press the SEARCH key until the OUT icon is shown on the display.
2. Advance up or down to the phone number you wish to dial by pressing
the or keys.
3. When the desired phone number is displayed, press the PBX DIAL key,
SPEAKER key, or lift the handset. Dialling starts automatically.
4. Press the DELETE key to remove the displayed number from the list.
Microphone Mute
The MUTE key switches off the handset and Speakerphone microphones,
so you can hear the other party, but they cannot hear you.
To Mute the call so that the outside party cannot hear you:
1. Press the MUTE key. The MUTE key LED will light up.
To cancel Mute and resume normal conversation:
1. Press the MUTE key. The MUTE LED will go out.
Message Waiting Lamp
Some PBX systems offer a visual message waiting system. The message
waiting lamp is turned on when there is a message left for you and flashes
while the phone is ringing to indicate an incoming call.
13