Newcon Optik LAM 10M IR - Manual (Page 9)

6
LAM automatically turns off after 30 minutes of being
switched in positions C and R. In order to activate LAM after
it has automatically turned off, return the switch (17, Fig.1)
into OFF position and then switch it to the desired position
again.
The remote switch (Fig.2) can be attached to LAM by a
connector (3, Fig.2) with a union nut. When not in operation
the connector (4, Fig. 1) is covered with a cap. The remote
switch key (1, Fig.2) is attached to weapon pivot or grip with
velcro tape (2, Fig.3).
LAM is mounted on the Picatinny rail. An optional mount
enables mounting LAM on a weapon barrel. This mount’s
fitting diameter is 15 mm.