NETGEAR DG834GT - Manual (Page 31)

Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
Connecting the Router to the Internet 3-5
August 2004
Connecting the DG834GT to Your LAN
This section provides instructions for connecting the DG834GT Super Wireless ADSL Router.
Note: The Resource CD included with your router contains an animated Installation Assistant to
help you through this procedure.
How to Connect the Router
There are four steps to connecting your firewall:
1. Install ADSL filters on the phone lines.
2. Connect the router to the ADSL filter.
3. Log in to the router.
4. Connect to the Internet.
Follow the steps below to connect your router to your network. Before you begin, locate the ADSL
configuration information from your Internet Service Provider (ISP).
1. C ONNECT ADSL F ILTERS ON THE P HONE L INES .
a. You need to install a filter on every telephone or device that shares the same phone
number as your ADSL router. Select the filter that came with your router.
Figure 3-3: ADSL microfilters
Note: If you purchased the DG834GT in a country where the filter is not included, you
must acquire one.
b. Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the
phone to the phone line connector (A):
0HONE
0HONE
$3,
,INE
One-Line Filter
Two-Line Filter
Splitter
With Splitter