Setting times and scheduling firewall services, How to set your time zone, Setting times and scheduling firewall services -14 – NETGEAR DG834GT User Manual
Page 74: How to set your time zone -14
Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
5-14
Protecting Your Network
August 2004
Setting Times and Scheduling Firewall Services
The DG834GT Super Wireless ADSL Router uses the Network Time Protocol (NTP) to obtain the
current time and date from one of several Network Time Servers on the Internet.
How to Set Your Time Zone
In order to localize the time for your log entries, you must specify your Time Zone:
1.
Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever Password and LAN address you
have chosen for the router.
2.
Select the Schedule link of the Security menu to display menu shown below.
Figure 5-11: Schedule Services menu
3.
Select your Time Zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
Select the Adjust for daylight savings time check box if your time zone is currently in daylight
savings time.