NETGEAR DG834GT User Manual
Page 56
Reference Manual for the Model DG834GT 108 Mbps Super Wireless ADSL Router
4-10
Wireless Configuration
August 2004
Figure 4-5.
Wireless Access menu
3.
Select the Turn Access Control On check box to enable restricting wireless computers by their
MAC addresses.
4.
If the wireless station is currently connected to the network, you can select it from the
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
5.
If the wireless station is not currently connected, you can enter its address manually. Enter the
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it may appear in the router’s DHCP table. The MAC address will be 12 hexadecimal
digits.
Click Add to add your entry. You can add several stations to the list, but the entries will be
discarded if you do not click Apply.
Note:
You can copy and paste the MAC addresses from the router’s Attached Devices menu
into the MAC Address box of this menu. To do this, configure each wireless computer to
obtain a wireless link to the router. The computer should then appear in the Attached Devices
menu.