Nikon Coolpix P90 User Manual

Page 140

Advertising
background image

128

Shooting Options: The Shooting Menu

S

h

ooti

n

g

, Pl
ay
ba
ck an

d S
e

tup

M

e

nus

ISO sensitivity

When ISO sensitivity is set to 3200 or 6400, Image size cannot be set to

F 4000×3000, E 3264×2448, D 2592×1944, I 3984×2656,
G 3968×2232 and H 2992×2992.
At these image size settings, selecting 3200 or 6400 for ISO sensitivity
automatically switches the Image size setting to C 2048×1536. The last image
size setting applied is restored when any setting other than 3200 or 6400 is
selected for ISO sensitivity.

When ISO sensitivity is set to High ISO sensitivity auto or 1600 and higher,

the setting for active D-Lighting will be changed to Off.

Metering

When an option other than Off is selected for Active D-Lighting, the setting for
Metering will be changed to Matrix.

Continuous

When an option other than Single is selected for Continuous, the setting for

Auto bracketing will be changed to Off.

Selecting Multi-shot 16 will fix the Image quality setting to Normal and Image

size setting to D 2592×1944.

• ISO sensitivity will be set automatically according to the brightness when

shooting mode

A, B, or C is used. The setting for ISO sensitivity will be fixed at

400 for shooting mode

D.

When an option other than Multi-shot 16 is selected for Continuous, the

original settings for Image quality, Image size and ISO sensitivity will be
restored.

Auto bracketing

When an option other than Off is selected for Auto bracketing, the setting for
Continuous will be changed to Single, and the flash mode setting will be changed to W.

AF area mode

When Spot AF area is selected for Metering, setting AF area mode to Center

changes the Metering setting to Matrix.

When an option other than Center is selected for AF area mode, the setting for

Metering will be changed back to Spot AF area.

Noise reduction

When Multi-shot 16 is selected for Continuous and Noise reduction is set to On,
Continuous will change to Single.

Distortion control

When On is selected for Distortion control, the setting for Continuous will be

changed to Single, and Auto bracketing will be changed to Off.
Even when the Distortion control option is disabled (Off), the Continuous and
Auto bracketing settings do not change.

• Distortion control does not function when shooting using y (blink proof ),

even if On is selected.

Advertising