NEC TheaterSync Video Processor - Manual (Page 30)

MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual
OSM Menu Level
Level 1 Level 2 Level 3 Level 4 Level 5
Comments
Vivid - -
Enhances color, expands video
range signals.
Dark Scene - -
Enhances detail in dark
scenes, expands video range
signals.
Bright Scene - -
Enhances detail in bright
scenes, expands video range
signals.
BCE
Graphics
3
- -
Transfers full range input
signals (0-255) to full range
output
Off -
Turns off Temporal Recursive
Noise Reduction (TRNR)
Low
(default)
- Select TRNR -- low bias setting
Med -
Select TRNR -- medium bias
setting
TRNR
High -
Select TRNR -- high bias
setting
Off (default) -
Turns off the Codec Noise
Reduction
Low -
Select Codec Noise Reduction,
low level
Medium -
Select Codec Noise Reduction,
medium level
HQV Noise
Reduction
CNR
High -
Select Codec Noise Reduction,
high level
Off (default) - - Toggles the split screen mode
Advanced
Split
On - - Toggles the split screen mode
5.2 Aspect Ratio
TheaterSync provides five different aspect ratio treatments. The operation mode of these
treatments depends on the aspect ratio of the input channel and the output display.
The TheaterSync assumes that the aspect ratio of input and output is consistent with the industry
standard definition of the aspect ratio of the particular input signal and video mode. Output
aspect ratio is thus determined by the resolution selected by the user in Setup Mode. Input aspect
ratio is determined by the TheaterSync video mode recognition circuitry. Only two output aspect
ratios are supported, 4:3 and 16:9
4
.
3
Default for DVI and Analog RGB inputs.
Page 30 NEC Solutions, Inc.
4 The special case of 1280 x 1024 SXGA (an aspect ratio of 5:4) on output is treated as if it were 4:3. The output of
a 1280 x 1024 display will be slightly distorted; circles will appear to be vertically oriented ovals. Since the