NEC TheaterSync Video Processor - Manual (Page 8)

MKT-0026-UMN-1.002F TheaterSync Video Processor User Manual
Portable Cart - An appliance and cart combination should be moved with extreme care. Quick
stops, excessive force, and uneven surfaces may cause the appliance and cart combination to
overturn.
Ventilation - Locate the unit with adequate space around it so that proper heat ventilation is
assured. Allow 10 cm (4 in) clearance from the rear and top of the unit, and 5 cm (2 in) from
each side.
Slots and openings in the unit's case are provided for ventilation to ensure reliable operation of
the unit and to prevent overheating. These openings must not be blocked or covered. The
openings should never be blocked by operating the unit while placed on a bed, sofa, rug, or
similar surface. This unit should not be placed in a built-in installation such as a bookcase unless
adequate ventilation is provided.
Entry of Foreign Objects and Liquids - Never push foreign objects of any kind into this unit
through the ventilation slots as they may touch dangerous voltage points or short-circuit
electrical/electronic parts that could result in fire, or electric shock, or both. Never spill liquid of
any kind onto the unit.
Electric Power - Only operate the unit from the type of electric power source indicated on the
unit's labeling. If you are not sure of the type of power supply that is available in your home or
workplace, consult your appliance supplier or local power company.
Grounding or Polarization - This unit is provided with a 3-pin, grounded, alternating current line
plug. This plug will fit into the power outlet only one way. This is a safety feature. Do not try to
defeat the safety purpose of the plug.
Power Cord Protection - Route power supply cords so that they are not likely to be walked on or
pinched by placing items upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
Overloading - Do not overload wall power outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Lightning - For added protection for this unit during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the power outlet. This will
prevent damage to the unit due to lightning or power surges.
1.4.3 Maintenance
Cleaning - Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Only use a soft cloth dampened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzene, or paint thinner.
Damage Requiring Service - Unplug this unit from the power outlet and refer servicing to
qualified service personnel under the following conditions:
• When the power cord or plug is damaged.
Page 8 NEC Solutions, Inc.