NEC LT240K - Manual (Page 21)

E-21
INSTALLATION AND CONNECTIONS
This section describes how to set up your projector and how to connect
video and audio sources.
3
1
2
Your projector is simple to set up and use. But before you get started, you
must first:
z Set up a screen and the projector.
x Connect your computer or video equipment to the projector. See page E-
27.
c Connect the supplied power cable. See page E-35.
NOTE: Ensure that the power cable and any other cables are disconnected
before moving the projector.
When moving the projector or when it is not in use, cover the lens with the lens
cap.
To the wall outlet.