Connecting your video equipment, Installation and connections, Making connections – NEC LT240K User Manual

Page 32

Advertising
background image

E-32

INSTALLATION AND CONNECTIONS

Ͼ

Making Connections

Connecting Your Video Equipment

RGB IN1 or IN2

AUDIO OUT

R

L

COMPONENT OUT

AUDIO IN

L

R

DVD player

Connecting Your DVD Player

Audio Equipment

Optional 15-pin-to-RCA
(female)

ן3 cable (ADP-CV1)

Audio cable (not supplied)

You can connect your projector to a DVD player with component output or

Video output. To do so, simply:

1. Turn off the power to your projector and DVD player.

2. If your DVD player has the component video (Y,Cb,Cr) output, use a com-

mercially available component video cable (RCA

ן3) and the optional

15-pin-to-RCA (female)

ן3 cable to connect your DVD player to the RGB

IN1 or IN2 connector on the projector.

For a DVD player without component video (Y,Cb,Cr) output, use com-
mon RCA cables (not provided) to connect a composite VIDEO output of
the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about

your DVD player's video output requirements,

Component video
RCA

ן3 cable

(not supplied)

Advertising
This manual is related to the following products: