NEC LT240K User Manual
Page 57
E-57
NOTE:
•
Some USB memory devices (brands) or USB memory card readers may not
work.
•
You cannot use a USB memory device and a USB memory card reader when
connecting a USB mouse to the projector.
Using a USB HUB that allows multiple USB memory devices or card readers
is not supported either.
•
Do not do the following while the USB memory device or USB memory card
reader’s access indicator is lit or flashing (while data is being accessed.)
Doing so can damage your USB memory device or USB memory card in the
reader. Back up your data in case it will need to be restored.
*
Pulling out the USB memory device or USB memory card reader from the
USB port of the projector.
*
Pulling out the memory card from the USB memory card reader
*
Turning off the main power switch or unplugging the power cable.
•
The drive for ”USB 1-4” is displayed only when the USB memory device or
USB memory card reader is connected to the projector. The drive for “USB 1-
4” may be displayed differently from the one in the USB memory card reader.
•
Some USB memory devices (brands) or USB memory cards cannot be used as
Protect key for the projector’s Security function.
CONVENIENT FEATURES