Connecting to your local ethernet network, Connecting to your local ethernet network -5, Figure 2-3 – NETGEAR DSL Modem Internet Gateway DG814 User Manual
Page 25: Typical installation -5
Advertising
Reference Manual for the Model DG814 DSL Modem Internet Gateway
Setting Up the Hardware
2-5
A typical installation is shown in
, below
Figure 2-3.
Typical installation
Connecting to your Local Ethernet Network
Your local network (LAN) will attach to the four Local gateway ports shown in
Local ports operate at either 10 Mbps (10BASE-T) or 100 Mbps (100BASE-Tx), depending on the
Ethernet interface of the attached PC, hub, or switch. For any connection which will operate at 100
Mbps, you must use a Category 5 (Cat 5) rated Ethernet cable, such as the cable included with the
gateway.
Advertising