Figure 6-4, Remote management menu -10 – NETGEAR DSL Modem Internet Gateway DG814 User Manual
Page 74
Reference Manual for the Model DG814 DSL Modem Internet Gateway
6-10
Advanced Configuration of the Gateway
From the Main Menu of the browser interface, under Advanced, click on Remote Management to
view the Remote Management menu, shown in
Figure 6-4.
Remote Management menu.
1.
Select the Allow Remote Management check box.
2.
Specify what external addresses will be allowed to access the gateway’s remote management.
For security, NETGEAR recommends that you restrict access to as few external IP addresses
as practical.
a.
To allow access from any IP address on the Internet, select Everyone.
b.
To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
c.
To allow access from a single IP address on the Internet, select Only this PC.
Enter the IP address that will be allowed access.
3.
Specify the Port Number that will be used for accessing the management interface.