Nikon Speedlight SB-600 - Manual (Page 37)

37
6 Confirm that the ready-light comes on, then shoot.
● ● ●
Setting the flash output level
The flash output level changes every time you press the
j or i button, as
shown below.
When you press the j button:
When you press the i button:
• The numbers in parentheses represent the adjustable flash output level in
Ȁ1/3 step
except between 1/1 and 1/2. Therefore, 1/2 (-0.7) and 1/4 (+0.3) represent the same
flash output level.
• To extend the flash shooting distance, choose a flash output level close to M1/1.
• The value can be quickly changed by continuously pressing the
i or j button.
• The decimal place blinks during adjustment.
=
The same flash
output level
Detailed oper
ation