Power Sentry COMPASS 4 - Manual (Page 50)

Newpoint Technologies, Inc. COMP-USER-006
Salem, NH 03079 Rev. 3.2 –01/31/01 50
Logging Into and Exiting the System
This section details how to start the Newpoint Compass computer,
and to launch Newpoint Compass.
IMPORTANT!
Before you can use the program to monitor your system, you
must configure System Parameters. The Compass User
Guide contains these important procedures.
Starting Up and Shutting Down the Computer
To start your computer,
1. Turn the PC and monitor on.
2. Enter a login name and password at the NT Login window. If
you are an authorized system user, Windows NT opens the
Desktop.
To shut down your computer,
1. Bring the current node to Stop state, and close the Newpoint
Compass Administrator.
2. Close all other open applications and windows. If an application
requires a backup, perform that task.
3. Click on the Start button on the Windows NT Desktop. Select
Shut Down on each of the next two windows. The PC logs you
off and closes Windows NT.