Nokia Mediamaster 9802 S - Manual (Page 6)

GB 6
AUDIO L R
phono connectors
Stereo outputs for
connection to a HiFi
system TV SCART
for connection
to the TV
AUX SCART
for connection to a VCR,
or an analogue satellite
receiver
* LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H polari-
sation) and a 0/22 kHz signal (bandswitch). Max LNB current is 500 mA.
DIGITAL AUDIO
phono connector
S/PDIF output for
connection to
a HiFi system
95-250 V AC
50-60 Hz
For connection of
the enclosed
mains cable
ANTENNA *
Satellite dish
input (F-connec-
tor)
Rear panel
SERIAL PORT
to read and load
data information TV AERIAL
for a terrestrial (con-
ventional) TV aerial
TV/VCR
for an RF-cable to the
aerial input of the TV or
VCR
Slot
for a CA module
with a Smartcard
to put the Mediamaster
in and out of standby
mode to move up/down in
the menus and to
change channels.
Display
shows channel number, error messages,
remote control commands and time in
standby mode
Front panel
Slot
for a Viaccess
Smartcard
Button
Push the button to
release an inserted
CA module
FRONT AND REAR PANEL
TELEPHONE
for connection
of the cable to
the phone jack