Nokia Mediamaster 9802 S - Manual (Page 9)

GB 9
Connecting to the TV
• Connect the SCART cable between the main SCART socket
on the TV and the TV SCART socket on the Mediamaster.
• Connect an RF cable from the TV/VCR output on the Media-
master to the RF input socket on the TV.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
General
There are many different types of TV/VCR and other equipment
that you can connect to the Mediamaster.
In this manual you will see some of the most common ways to
connect your equipment.
If you use RF cables you will have to tune your TV and VCR to the
Mediamaster output channel (see page 11).
If you have problems with your connections and need help, con-
tact your dealer or Service Provider.
RF
SCART
Connecting a TV and VCR
Refer to your VCR’s manual for full instructions.
• Connect one SCART cable between the main SCART socket
on the TV and the TV SCART socket on the Mediamaster.
• Connect another SCART cable between the VCR and the AUX
SCART socket on the Mediamaster.
• Connect the RF cable from the RF output on the VCR to the
TV aerial input on the TV.
• Connect the TV aerial to the RF input socket on the VCR.
VCR
Media-
master SCART
SCART
RF
If your TV has a SCART socket, but your VCR does not
• Connect a SCART cable between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect an RF cable from the RF output on the VCR to the TV
aerial input on the TV.
• Connect an RF cable from the TV/VCR output on the Media-
master to the RF input socket on the VCR.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
VCR
SCART
RF
RF
INSTALLATION OF THE MEDIAMASTER
Media-
master